Stol / Chair: Spøjs / Speys - MONO catalogue 3

What you notice first about this chair is the striking colour. It's not paint, because you an see the grain clearly but it's not stain … the chair is made in hardwood from a tree of the genus Peltogyne that is native to South and Central America and is known, for fairly obvious reasons, as Purpleheart because the heartwood turns a deep purple after the timber is cut.

But it's not just the colour that is unusual. The chair has an unusual form that was inspired by a work of the German artist Joseph Beuys that is now in the Neue Staatsgalerie in Stuttgart. It has a solid and relatively thick seat in wood with four turned or round legs that are slightly tapered - so thinner at the floor - and set just in from each corner but with a pronounced splay outwards at an emphatic angle to make the chair stable. These legs are fixed with a round tenon that goes through the seat and is held in place by a wedge driven down into the tenon from above.

So … so far fairly conventional.

But the chair is rectangular - much deeper than it is wide - with a back rest fixed across the narrow end … well a back rest if you sit astride the chair with your back against the rest or it is a single arm rest if you sit on the chair as if it is a bench.

This backrest / armrest is shaped rather like a staple or perhaps more like a squared-off and simplified version of the Greek letter Pi [ π ] with two uprights in turned wood and a straight but tapered cross bar linking the two at the top. This is dropped down into deeply-curved vertical grooves or channels on each long side of the seat - just in from the corners of the narrow end - and down and slightly inwards to cross over the legs - again running through rounded vertical channels but here cut in the legs - and stop short of the floor.

Spøjs / Speys
MONO Catalogue number 3
designed by: Anne Fabricius Møller
produced by: Toke Overgaard

Amaranttræ / also known as amaranth and purpleheart
height: 69
width: 48
depth: 63 cm